|
|
TES-1340 Hot-Wire Anemometer
|
Fast Response Probe.
Air Flow Volume
Instant / Avg / 2/3 Vmax Flow Measurement.
Velocity m/s, ft/min, knots, km/hr, mph.
Data hold & Maximum / Minimum function.
Manual data memory and read function (10 x 99 sets).
LCD triple display.
Auto power off function ON / OFF Time setting.
Backlight function ON / OFF Time setting.
Snake telescoping probe.
|
Anemometer
|
|
|
|
TES-1380 PH / ORP / Temperature Meter
|
Fast and Easy pH measurement
Dual LCD display shows PH/℃& ℉ or mV/ ℃&℉ simultaneously
Logging 99 readings
|
PH Tester
|
|
|
|
TES-1381 Conductivity & pH/ORP Meter
|
pH, mV, Conductivity, TDS, Resistivity, Salinity, Concentration and Temperature measurement functions.
0.001pH, 0.1mV, 0.001µS/cm, 0.001mg/L and 0.1°C / °F Resolution.
Programmable Temperature Coefficient for conductivity measurement.
Auto / Manual Temperature Compensation for pH and conductivity measurement.
Practical Salinity in the Range of 0 to 42.0, in accordance with UNESCO data measurement.
Dual display with temperature Simultaneously.
Easy & Fast to operate.
Ideal for most water application.
Available cell constant of K=0.1, K=1.0 and K=10.
99 sets manual data memory and read function.
2250 sets auto datalogging capacity.
USB interface.
Indication of pH Electrode status.
|
PH Tester
|
|
|
|
PROVA-8500 Energy-Saving Tester
|
Standby power measurement ( 0 to 100W width 0.001W resolution)
Regular power(0~2000W)
100W AC power supply + AC power analyzer]
Programmable nominal output (85V to 250V , 45Hz to 65Hz)
power quality measurement (W , PF , V , A)
PC programmable through RS-232C interface( Optional RS-232C to USB bridge)
Programmable Over current protection (OCP)
Memory of 99 preset voltage and frequency
Standby and Operation Button
Back space for easy correction
Standby power measurement of note book, desktop PC, LCD TV,...
|
Power Analyzer
|
|
|
|
WM-01/02 Power Analyzer Datalogger
|
4 LCD Displays with W, PF, V, A
Easy Plug-in and Test
RS-232 Computer Interface
|
Power Analyzer
|
|
|
|
TES-3096 DC/AC KW CLAMP METER
|
Compact Size
Trms KW measurement
AC/DC Current Measurement (AC 600A/DC 600A)
600V AC & 600V DC, Ohm/Continuity Beeper
600 V AC & 600 V DC. Ohm/Continuity Beeper
One Touch DCA Zero
|
Power Clamp Meter
|
|
|
|
AC Voltage (50Hz to 400 Hz):Trms Range Resolution Accuracy Sensitivity Overload Protection 999.99 mV 0.1mV ±1% ± 0dgts(50,60Hz) ±2%±20dgts(40~100Hz) 2.0mV 600V 9.999 V 1mV 0.020V 99.99V 10mV ±1% ± 20dgts(50,60Hz) ±2% ±20dgts(40~
|
3-3/4 Digital LCD, 4000 count, Autoranging.
Trms KW, Current, Voltage measurement.
AC Current 0.1A to 700A.
Resistance and Continuity test.
Data hold & MAX function.
Pocket size.
Auto Power off.
IEC1010-1 CAT III 600V
|
Power Clamp Meter
|
|
|
|
TES-3079K Power Clamp Meter
|
HVAC Application:
Check current draw in motors and compressors.
Use MAX/MIN/Recording in the temperature mode to assess efficiency.
Test run/start capacitors.
Confirm low voltage control signals.
Measure flame safeguard device current draw.
Confirm power sources.
Analyze temperature and voltage or current data with the aid of the time stamp.
Insulation test up to 100M Ω.
Electrical Application:
Check for energized circuits and balance loads.
1 Φ /3 Φ (3P3W/3P4W)Power analyzer.
Evaluate electrical contacts.
Capture motor in-rush current readings.
Determine peak power demand periods.
Verify line voltage stability.
Monitor motors and other loads for excess heat.
Check motor run/start capacitor values.
|
Power Clamp Meter
|
|