You have 0 items in your cart.
| Name | Description | Category | ||
|---|---|---|---|---|
|
Fluke BP881 BNC to Male Double Stacking Banana Plug | Allows for hands-free testing in controlled voltage environments 500 VRMS maximum Banana plug is nickel-plated, beryllium copper for low contact resistance The BNC shell is plated for tarnish resistance Operating temperature +50 °C (+122 °F) maximum | Automotive Accessories |
|
|
Fluke BP880 BNC to Female Double Stacking Banana Plug | Allows for hands-free testing in controlled voltage environments 500 VRMS maximum Banana plug is nickel-plated, beryllium copper for low contact resistance The BNC shell is plated for tarnish resistance Operating temperature +50 °C (+122 °F) maximum | Automotive Accessories |
|
|
Fluke 90i-610s 1A to 600A AC/DC Current Probe | Current Range: 1 to 600 A DC or AC Peak Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A) Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A Frequency Range: 40 Hz to 400 Hz Working Voltage: 600 V AC rms Maximum Conductor Diameter: 34 mm (1.34 inch) Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V | Automotive Accessories |
|
|
Fluke SV225 Stray Voltage Adapter | Stray voltage can appear in electrical installations, due to the capacity between wires This may result in erroneous readings on high impedance meters The SV225 solves this without compromising safety On energized wires, the meter will indicate the real voltage On non-energized circuits the meter will read close to zero (even if there are stray voltages) It can be used with all modern meters with standard input spacing. Rated CAT III 1000V, CAT IV 600 V | Batteries, Charges and Adapters |
|
|
Fluke PM9080 Optically Isolated RS-232 Adapter | Safety designed serial interface for digital hard-copy output to serial printer or remote control and data exchange with a PC. Compatible with all Fluke ScopeMeter® test tools, with Power Quality Analyzers, Graphical MultiMeters and MultiFunction Counters. Hard Copy: ScopeMeter test tools support Epson FX/LQ Series, LaserJet and DeskJet compatible printers Remote control: Waveforms, Scope and Meter measurements, Front Set-ups and performance verification/calibration Transfer rate: up to 57k6 Baud | Batteries, Charges and Adapters |
|
|
Fluke TI-CAR Charger | For the ultimate flexibility in the field - recharge your thermal imager wherever and whenever you need to For use with: Ti32, Ti25, Ti10, TiR32, TiR1, TiR | Batteries, Charges and Adapters |
|
|
Fluke PM8907 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. Line cord not included A North American line plug adapter is included | Batteries, Charges and Adapters |
|
|
Fluke PM8907 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. Line cord not included A North American line plug adapter is included | Batteries, Charges and Adapters |
|