You have 0 items in your cart.
Products
Sub Categories
| Name | Description | Category | ||
|---|---|---|---|---|
|
CIA013G-COMPLETE LARGE SCREEN LEEB HARDNESS TESTER W PRINTER/USB SOFTWARE/MENU DISPLAY
|
Advantages l Largest screen 3 inch , showing all functions and parameters.it is the largest screen of leeb hardness tester, easy read and operate. l The best impact device we offer ,stable, ageing resistance, through exam ,we can 2 years long time using ,but others can not. l Test at any angle, even upside down. l Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately. l Seven impact devices are available for special application. Automatically identify the type of impact devices. l Large capacity memory could store 600 groups (Relative to average times32～1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc. l Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit. l Battery information indicates the rest capacity of the battery and the charge status. l User calibration function. l USB port with the PC humanity multi-functions data proceeding software. l Original... | Hardness tester |
|
|
DAK001-DIK-5553 PUSH-CONE SOIL HARDNESS METER (SOIL MOISTURE METER) - MADE IN JAPAN | This device measures a resistance of soil easily by pushing a cone vertically into the profile scrapped evenly. Measuring range 0 - 40mm (0 - 49MPa) Cone angle ‹ 20' Strength of spring 78.4N/40mm Outside dimensions L225mm x diam.40mm A case is attached. @ Weight 250g Total weight Approx370g ( Main unit 250g ) | Hardness tester |
|
|
CIA013ANA-AIRFORCE ANALOG SHORE TYPE A RUBBER TIRE DUROMETER HARDNESS TESTER,NEW | Product Name:Shore(Tire) A DurometerShore A DUROMETER :It is designed for testing the hardness of soft rubber,printer roller and other elastomer material.(ASTM--D--2240) Specification:Resolution: 1.0HA Total measure force: 8.1N Outside pressure: 1kg Pressure needle top cone angle of 35° Needle length: 2.5mm Flat cone point: φ0.79mm diameter Dial Scale: 0~100HA User Notice:1.Thickness of test specimen >6mm,no more than 3 layers; Test area >/=feet area(diameter.18mm).2.Test 3 times and calculate the average as test result. | Hardness tester |
|
|
CIA013-Digital Shore A Hardness Tester Tire Tyre Meter Durometer 100HA | Digital Shore A Durometer Product Name:Shore A DurometerShore A DUROMETER :It is designed for testing the hardness of soft rubber,printer roller and other elastomer material.(ASTM--D--2240) Specification:Resolution: 1.0HA Total measure force: 8.1N Outside pressure: 1kg Pressure needle top cone angle of 35° Needle length: 2.5mm Flat cone point: φ0.79mm diameter Dial Scale: 0~100HA User Notice:1.Thickness of test specimen >6mm,no more than 3 layers; Test area >/=feet area(diameter.18mm).2.Test 3 times and calculate the average as test result. | Hardness tester |
|
|
STY404-AIRFORCE ULTRASONIC FLOW METER FLOWMETER COMPLETE SET CLAMP ON SENSOR(DN15-6000MM,160C) | This listing is for DN15-6000mm pipe size, the water temperature is from 0-160c It comes with S1H transdcuer (DN15-100mm) and NEW M1H transducer (DN50-700mm); 5m*2 signal cable;metal clamp fixture; one aluminium case; tape ruler;adaptor; data line You must use coupling agent when you measure the flow rate. If you do not use the silica gel, it will have no signal It comes with factory issued calibration certificate | Ultrasonic Flowmeters |
|
|
STY410-AIRFORCE HIGH TEMP ULTRASONIC FLOW METER FLOWMETER CLAMP ON SENSOR(DN15-700MM,160c) | Velocity:0.03 ~ 105 ft/s (0.01~30 m/s), bi-directionalHigh Temperature (0~160c)Rate Units: Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable.Totaliser:7-digit totals for net, positive and negative flowLiquid Types:Virtually all liquidsDatalogging: Built-in data logger can store over 2,000 lines of data- Ideal for expansion - Installation without process interruption - Easy installation - Accurate and reliable - No pressure loss - Maintenance-free, no mobile parts - Non-wearing - Hand-held device for control measurements | Ultrasonic Flowmeters |
|
|
STY400-AIRFORCE ULTRASONIC FLOW METER FLOWMETER CLAMP ON SENSOR(DN15-700MM,70c) | Velocity:0.03 ~ 105 ft/s (0.01~30 m/s), bi-directionalRate Units: Meter, Feet, Cubic Meter, Liter, Cubic Feet, USA Gallon, Imperial Gallon, Oil Barrel, USA Liquid Barrel, Imperial Liquid Barrel, Million USA Gallons. User configurable.Totaliser:7-digit totals for net, positive and negative flowLiquid Types:Virtually all liquidsDatalogging: Built-in data logger can store over 2,000 lines of data- Ideal for expansion - Installation without process interruption - Easy installation - Accurate and reliable - No pressure loss - Maintenance-free, no mobile parts - Non-wearing - Hand-held device for control measurements | Ultrasonic Flowmeters |
|
|
RIX008-PIN-TYPE MOISTURE TRANSMITTER DRY / HUMIDIFICATION CONTROL, 4-20MA | Applications : Wood , Bamboos , Building Materials , Leathers , Foods , Cardboard ... etc . Moisture Measurement and Control 4 ~ 20mA IP65 Watertight Enclosure, Stainless Steel Probe Custom Calibration for Measuring Object Wide Supply Voltage: 12 ~ 40Vdc Easy Mounting and Quick Wiring The length of probe cable can be specified Moisture: 0.0 ~ 100.0% output scaleInstrument : ø90 x 54(H)mmProbe : ø2.5 x 25(L)mmMoisture Measurement and Control4 ~ 20mA or 0 ~ 2Vdc OutputIP65 Watertight Enclosure, Stainless Steel ProbeCustom Calibration for Measuring ObjectWide Supply Voltage: 12 ~ 40VdcEasy Mounting and Quick WiringThe length of probe cable can be specified | Moisture meters |
|