You have 0 items in your cart.
Products
Sub Categories
| Name | Description | Category | ||
|---|---|---|---|---|
|
DKK-TOA COD-60A | The integrated oxidation & titration design and the sequence control function simplified operations Smaller waste solution (lower than 10mL per measurement) Real time display of sequence and titration curve Meas. range 0 - 20.0/40.0/100/200/400/1000 mg/L | Simplified COD Meter |
|
|
DKK-TOA AF-100 | Enables bacteria and cell measurements in 50 sec. Highly sensitive measurement at 1 - 1000 cells/mL level Enables direct measurement of membrane filter Compliant to sanitary management by swap test Useful functions such as ATP concentration and cell converted value available Automatic reagent dispenser is optional (DF-10 sold separately) | ATP Analyzer |
|
|
DKK-TOA PHC-7D | Immersion Type Sensor with Pulse Air Jet Cleaner PHC-7D Immersion type pH/ORP electrode holder combined with pulse air jet cleaner Cleaning by high-speed water stream created by the rapid expansion of pulse-jetted compressed air in the sample water High cleaning effect due to air bubbles present in the water stream randomly hitting the electrode No consumables required, such as reagents, brushes | Transmitter for Industrial pH/ORP Analyzer |
|
|
DKK-TOA HC-G80 (KCl Replenish-Free/Refillable) / HC-G82 (KCl Replenish-Free/Refillable) | Flow-Through Type Holder for Replaceable Tip Electrodes HC-G80 (KCl Replenish-Free/Refillable) / HC-G82 (KCl Replenish-Free/Refillable) HC-G80: Transparent holders made of PVC (heat resistance: 60 degrees C) ; maximum pressure resistance: 0.15MPa HC-G82: PP/SUS316 part (heat resistance: 80 degrees C) and PVDF/SUS316 part (heat resistance: 100 degrees C) ; maximum pressure resistance: 0.3 MPa | Transmitter for Industrial pH/ORP Analyzer |
|
|
DKK-TOA HC-G95 (KCl Replenish-Free) | Drop-In Type Detector for Replaceable Tip Electrode HC-G95 (KCl Replenish-Free) Two selections: throw-in type for deep tanks or drop-in type with a protection pipe Made from transparent PVC (heat resistance: 60 degrees C) SUS protection pipe (maximum length: 5 m) and mounting bracket available | Transmitter for Industrial pH/ORP Analyzer |
|
|
DKK-TOA HC-G70 (KCl Replenish-Free/Refillable) / HC-G72 (KCl Refillable) | Immersion Type Holder for Replaceable Tip Electrode HC-G70 (KCl Replenish-Free/Refillable) / HC-G72 (KCl Refillable) HC-G70: Transparent PVC holder (heat resistance: 60 degrees C) and semi-transparent PP holder (heat resistance: 80 degrees C) available HC-G72: SUS316 holder (heat resistance: 80 degrees C) Length: 0.5 - 3.0m KCl refillable type stores KCl inside the holder Mounting bracket/flange available | Transmitter for Industrial pH/ORP Analyzer |
|
|
DKK-TOA HBM-160/HBM-162（4-wire） | Industrial pH/ORP Transmitter HBM-160/HBM-162（4-wire） Multi-function pH/ORP analyzer for field installation in a compact aluminum diecast enclosure One-touch calibration and various self-diagnostic functions 2-point contact signal and 2-channel output including temperature (RS-232 optional) Power supply: AC90～264V, 50/60Hz Meas. range pH meter (HBM-160) : pH -1 - 15 ORP meter (HBM-162) : ORP -2000 - +2000mV | Transmitter for Industrial pH/ORP Analyzer |
|
|
DKK-TOA HBM-165H（2-wire） | pH / ORP Transmitter with HART Interface HBM-165H（2-wire） HART communication protocol interface with a 2-wire, 24 VDC circuit Available for both pH and ORP measurements Diecast aluminum enclosure, digital display and a wide range of other useful features One-touch auto calibration Self-diagnostic function Meas. range -1.00 - 15.00 ORP -2000 - 2000 mV | Transmitter for Industrial pH/ORP Analyzer |
|