You are here: Home Products

Products

  • Filter
  • Search
  Name Description Category
183-cb
Sew 183 CB FEATURES Cable Tracer ● Trace wires or cables.● Volume control.● Tip & Ring identification.● 2 bi-colored LEDs ( Line 1 & Line 2).● Tone speed selection : Fast & Slow.● A phone jack is designed for headset or handset. (Amplifier probe)Phone Tester ● Continuity and resistance testing for voltage-free objects.● Check direct and alternating voltages.● Testing capacitors.● Testing diodes.● Power ON/OFF switch.● The indication of the LED lamp and the sound of the     buzzer can occur at the same time.● The LED indication for Power ON status.     SPECIFICATIONS         Amplifier Probe     Frequency 1Hz~12kHz Receiver distance < 50cm Sensitivity control ˇ Probe tip Fixed Power source 9V(6F22) × 1 Dimensions 230(L) × 56(W) × 27(D)mm Weight Approx. 125g (battery included) Tone Generator     Wave form Square Wave Frequency 1kHz±15% Over voltage protection 80V DC Single tone   ─ ... Cable Tracer and Phone Tester
185-lct
Sew 185 LCT FEATURES ● Designed for RJ45/RJ11 modular cables, 10/100   base-T cable and Token Ring cable.● The LAN cable tester can verify cable continuity,    open, short circuit and miss-wired. ● The remote receiving unit is available for installed   cables far away either on the wall plates or on the    patch panels.● Auto and manual scan functions.● Ground wire test.         ● Lock status function.● Buzzer sound warning for wire status.● Display : LED indication for wire status.     SPECIFICATIONS       Display LED Operating temperature 0°C ~ 40°C Dimensions Master unit 132(L) × 55(W) × 39(D)mm Remote receiving unit 74(L) × 30(W) × 25(D)mm Weight (battery included) Master unit : 148 g Remote receiving unit : 33g Power source 9V × 1 Safety standard EN 61326-1 Lan Cable Tester
187-mct
Sew 187 MCT FEATURES Lan Cable Tester ● Designed for RJ45/RJ11 modular cables, 10/100   base-T cable and Token Ring cable etc.● The LAN cable tester can verify cable continuity,    open, circuit and miss-wired.  ● The remote receiving unit is available for installed   cables far away either on the wall plates or on the    patch panels.● Auto and manual scan function.● Ground wire test.● Display : LED indication for wire status. Digital Multimeter ● 4000 counts LCD.● Full automatic measurement.   Voltage measurement.   Resistor measurement.● Range change function.● Select function.● Data Hold function.● Continuity check.● Diode measurement.● Low battery indication.● Input impedance:10MΩ.     SPECIFICATIONS   AC Voltage     Range Resolution Accuracy 400mV 0.1mV ±(1.0%rdg+5dgt) 4V 1mV 40V 10mV 400V 100mV 750V 1V DC Voltage     ... Cable Tracer and Digital Multimeter
186-cb
Sew 186 CB FEATURES Cable Tracer ● Trace wires or cables.● Volume control.● Tip & Ring identification.● 2 bi-colored LEDs ( Line 1 & Line 2).● Tone speed selection : Fast & Slow.● A phone jack is designed for headset or handset.   (Amplifier probe) Digital Multimeter ● 4000 counts.● ACV, DCV.● Ohm, Diode, & Continuity testing.● Auto-range.● Data hold.● Low battery indication.● Select function.● Auto-off.     SPECIFICATIONS   AC Voltage     Range Resolution Accuracy 400mV 0.1mV ±(1.0%rdg+5dgt) 4V 1mV 40V 10mV 400V 100mV 750V 1V DC Voltage     Range Resolution Accuracy 400mV 0.1mV ±(0.5%rdg+3dgt) 4V 1mV 40V 10mV 400V 100mV 1000V 1V Resistance     Range Resolution Accuracy ... Cable Tracer and Digital Multimeter
895-pr
Sew 895 PR FEATURES ● Non-contact detector clips. No metal contact points to    advocate greater safety.● Two functions in one unit : open phase and phase   sequence detection.● Designed for checking a wider range of 3-phase power    sources.● LED display lights with buzzer indicator.       ● Brightness button feature for better visibility in dimly lit    areas or sunlight.● Magnetic mounting feature.     SPECIFICATIONS             Measurement principle Static induction Input voltage 75~1000Vac Frequency range 45-65Hz Auto-off 5 min. after power on without detection Low battery warning Power LED flashes at 7V ± 0.2 or less Operating temperature & humidity 0°C ~ 40°C Max. 80% R.H. Storage temperature & humidity -10°C ~ 50°C Max. 80% R.H. Cable length Approx. 800mm Dimensions 128(L) × 72(W) × 44(D)mm Weight (battery included) Approx. 380g Power source 9V (6LF22) × 1 Safety standard EN 61010-1... Non-Contact Type Phase Sequence Indicators
890-pr
Sew 890 PR FEATURES ● The 890 PR is a Non-Contact phase detector    with flashing LEDs and a beeping buzzer to    show the detection of AC 3-phase sequence.● Two functions in one unit : open phase and     phase sequence detection.● Convenient brightness switch to make the    indication visible in dim areas or sunlight.● Back cover magnet attaches the instrument to   the AC distribution panel offer easy measurement.● 3-Phase AC 75 to 1000V is fitted for detection.● Detect frequency range is from 45 to 65Hz.     SPECIFICATIONS       Measurement principle Static induction Input voltage 75~1000Vac Frequency range 45-65Hz Auto-off 5 min. after power on without detection Low battery warning Power LED flashes at 4.6±0.1V or less Operating temperature & humidity 0°C ~ 40°C Max. 80% R.H. Storage temperature & humidity -10°C ~ 50°C Max. 80% R.H. Cable length Approx. 800mm Dimensions 118(L) × 69(W) × 38(D)mm Weight (battery included) Approx. 370g ... Non-Contact Type Phase Sequence Indicators
4156-pr
Sew 4156 PR FEATURES ● The 4156 PR is used to identify the leads of a diconnected motor so    that when the motor is in true phase sequence, it will run in the    desired direction.     SPECIFICATIONS       Measuring ranges 0~200kΩ Test leads AL-34 length : 50cm Dimensions 250(L) × 190(W) × 110(D)mm Weight (battery included) Approx. 1280g Power source 1.5V (AA) × 2 Safety standard EN 61010-1 EN 61326-1 Phase Sequence Indicators (Contact Type)
888-pmr
Sew 888 PMR FEATURES ● Indicates phase rotation.        ● Indicates phase presence.● Indicates motor rotation/wiring.● Indicates battery status.● Phase rotation and motor rotation indication works from as low as 1Vac.● Small, rugged enclosure.● Color coded test leads.● Phase presence indication from as low as 100 Vac. ● Very low consumption.● Fused.      ● Lightweight, robust and compact.● Works from 2 Hz to 400 Hz Sine.     SPECIFICATIONS       Phase Presence Nominal Voltage for Phase Presence Indication (The voltage required for the neon Lamps L1, L2, L3 to light up). From To Freq 100Vac 500Vac 10-400Hz Determination of Phase Rotation Field Direction From To Freq 1Vac 500Vac 2-400Hz Determination of Motor Connections (requires > 1/2 turn of the shaft) From To Freq 1Vac 500Vac 2-400Hz Maximum Current Consumption 18mA Over Voltage CLASS III 500V Over Load between all terminals 500V Battery OK goes off when battery voltage < 6.5 Vdc Dimensions ... Phase Sequence Indicators (Contact Type)