You have 0 items in your cart.
Products
| Name | Description | Category | ||
|---|---|---|---|---|
| GW INSTEK GFG-8020H | Features *Frequency Range : 0.2Hz ~ 2MHz *Coarse and Fine Tuning *Waveform : Sine, Triangle, Square, TTL Pulse *CMOS Output *Built-In 4 Digits Counter (INT Only) *Large 0.5" LED Display *Variable DC Offset Control *Output Overload Protection *VCF Input Function | Analog Function Generators |
|
|
|
GW INSTEK GFG-8015G | Features *Frequency Range : 0.2Hz ~ 2MHz *Waveform : Sine, Triangle, Square, TTL Pulse *Variable DC Offset Control *Output Overload Protection *VCF Input Function *1000 : 1 Tuning Range | Analog Function Generators |
|
|
GW INSTEK GSG-120 | Features *Freq Range 100kHz ~ 110MHz *Output Level -19 ~+99 dBu *All Operations are Controlled by Microprocessor *Memory Storage: 10 points in one block(up to 100 continuous points) *and 4 output levels *Memory Data Copy *Back Space key *Remote Control Function(Need the GRC-1201 option) *FM Stereo Modulation (GSG-122 only) | Other Signal Sources |
|
|
GW INSTEK GAG-810/809 | Features *Frequency from 10Hz ~ 1MHz *0.02% Low Sine Wave Distortion (GAG-810 Only)*6 Steps Output Attenuator *EXT SYNC Function | Other Signal Sources |
|
|
GAS DNA GMS1000 Single -Channel digital controller for gas detector | GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more comprehensive. | Digital Controller |
|
|
GAS DNA GMS1500 4-Channel digital controller for gas detector | GMS-1500 is four channel digital controller which can be connected to four (4) gas detectors. Receiving analogue continuous signal from four (4) detectors and converting it into digital signal, GMS-1500 provides various alarming and monitoring environment by micro-processor. Also, GMS-1500 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more comprehensive. | Digital Controller |
|
|
GAS DNA GMS 2000 Multi-channel digital controller for gas detector | GMS-2000 is multi-channel digital controller to monitor gas leakages from more than one gas detectors simultaneously. GMS-2000 is composed of one alarming unit & more than one receiving units. While each receiving units in GMS-2000 receive density signals from external gas detectors, when the density becomes higher than alarm value, receiving units automatically give signal to alarming unit to sound alarm. GMS-2000 transmits the relay output and standard current output signal 4-20㎃ to various controllers such as PLC, DDC, recorders, and computers for composition of integrated gas monitoring system. | Digital Controller |
|
|
GW INSTEK PCS-1000 | Features - 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB | Precision Current Shunt Meter |
|