You have 0 items in your cart.
| Name | Description | Category | ||
|---|---|---|---|---|
|
Single Gas Detector Ex-Proof Disposable 24 Month Gas Detector | 24 month disposable detector Requires no calibration or maintenance Simple, convenient one-button operation IP66/67 rating for moisture/dust protection Built-in event logging stores alarm events | Gases (Workplace Safety) |
|
|
STY009-ST316V4 ADVANCED RECHARGEABLE REFRIGERANT LEAK DETECTOR- ALL CFCS/HCFCS +DITTO + R-507 (AZ-50) from USA | Either Semiconductor or Infrared technologies are applied to this product family. Unlike the conventional semiconductor one, the infrared leak detector not only last longer but provide the contamination model to detect the smallest leak. Both type have 3 adjustable sensitivity levels and LET tip light. They start up with noticeable start-up melody (312/316) and easy recharged with USB power adaptor (312/316). The multiple colors LED are easy for users to identify the leak levels. | Gas Leak Detectors |
|
|
SEW0019-PD-40AM DC40KV High Voltage Testers H.V. Probe Meter | FEATURES ● Measures positive polarity DC voltages up to 40kV.● Lightweight and rugged.● 2 available contact tips: round needle tip for normal use and a special flat spring-type for CRT anode.● Are typically used to measure high voltages in TV sets, power supplies and instruments in laboratories. SPECIFICATIONS Input impedance 600 MΩ Attenuation ratio 40000 : 1 Accuracy DCV (0 ~ 20kV) ± 2% DCV (20kV ~ 40kV) ± 3% Max. working voltage DC 40kV Operating temperature 0°C ~ 40°C Storage temperature -10°C ~ 50°C Cable length 1 m Weight Approx. 400g Safety standards EN 61010-1 EN 61010-031 EN 61326-1 | High voltage detectors |
|
|
SEW3220-277 Slim-head Non-Contact H.V. Detector
|
FEATURES ● 2 ranges for selection ( 2 function buttons )● Power consumption: Off : Less than 5uA Low voltage detection mode: Less than 40mA High voltage detection mode: Less than 40mA● Circuit test function Press the Test button to make sure the whole circuit is working well before testing actual high voltage circuits.● Press the LOW button, 277 HP is ready for low voltage detection.● Press the HIGH button, 277 HP is ready for high voltage detection.● Optional accessory | High voltage detectors |
|
|
SEW0002-TELESCOPIC HIGH VOLTAGE DETECTOR UP TO AC 24KV | ● Telescopic, compact, lightweight.● High voltage detection.● Low voltage detection.● Self test button feature.● Easy-to-recognize indication.● Waterproof. The HD detect the presence of voltage in AC lines. An elongate insulation rod permits checking of high tension circuits at safe distance for voltage. The equipment is compact, lightweight, and easy to handle, and is also available for voltage detection in low-tension circuits. ●Working voltage range: H.V. : 3kV~24kV AC....hold grip portion to detect. L.V. : 80V~600V AC....hold nameplate portion to detect. ●Frequency : 50Hz / 60Hz ●Operation Test : (Initial voltage) (a)When stretched, hold the grip portion. Put the sensing tip in contact with the voltage : 250V AC ± 50V the LED and buzzer should work. (b)When retracted, hold the nameplate portion. Put the sensing tip in contact with the voltage : 80VAC or below the LED and buzzer should work. ●Operation start distance Distance at which operation starts when front metal is brought near Ø5mm O.C. wire with grip portion meld by hand. Where 24kV√ 3 (voltage to ground)....about 20cm. Where 6.6kV√ 3 (voltage to... | High voltage detectors |
|
|
SEW3210-276SV3 TELESCOPIC HD HIGH VOLTAGE DETECTOR UP TO AC24KV | ● Telescopic, compact, lightweight.● High voltage detection.● Low voltage detection.● Self test button feature.● Easy-to-recognize indication.● Waterproof. | High voltage detectors |
|
|
SEW0008-36.5KV Adjustable High Voltage Detector (AC 6kv~36.5kv) | FEATURES ● Telescopic, compact, lightweight.● High voltage detection.● Self test button feature.● Easy to recognize indication.● High intensity red light emitting diode and intermittent audible sound for easy recognition in full sunlight and noisy environments.● Waterproof. SPECIFICATIONS SEW0008 SEW0007 Withstand voltage (On insulating rod) 100kV / 300mm : 1 minutes Insulation resistance 2000MΩ min by 1kV / DC megger at the same testing location as withstand voltage Leakage current 100uA or less than 100uA at withstand voltage test Construction Water proof (detecting head impervious to water) Measuring voltage range 6kV~36.5kV 6kV~81.5kV Operation start voltage (To ground) 2.7kV 2.7kV Display Light : Flashing red light. Sound : Intermittent sound 50 dB apart 3 m. Frequency 50/60Hz Operating temperature 0°C ~ 40°C Battery 2 button-cells LR44(1.5V) ... | High voltage detectors |
|
|
SEW0007-81.5KV Adjustable High Voltage Detector (AC 6kv~81.5kv) | FEATURES ● Telescopic, compact, lightweight.● High voltage detection.● Self test button feature.● Easy to recognize indication.● High intensity red light emitting diode and intermittent audible sound for easy recognition in full sunlight and noisy environments.● Waterproof. SPECIFICATIONS SEW0008 SEW0007 Withstand voltage (On insulating rod) 100kV / 300mm : 1 minutes Insulation resistance 2000MΩ min by 1kV / DC megger at the same testing location as withstand voltage Leakage current 100uA or less than 100uA at withstand voltage test Construction Water proof (detecting head impervious to water) Measuring voltage range 6kV~36.5kV 6kV~81.5kV Operation start voltage (To ground) 2.7kV 2.7kV Display Light : Flashing red light. Sound : Intermittent sound 50 dB apart 3 m. Frequency 50/60Hz Operating temperature 0°C ~ 40°C Battery 2 button-cells LR44(1.5V) ... | High voltage detectors |
|