|
|
FLU0373-FLUKE FTK1000 FLUKE NETWORKS SIMPLIFIBER PRO MULTIMODE FIBER VERIFICATION KIT
|
Dual-wavelength testing
Tests multimode and singlemode fiber
Measures optical power and loss at 850 nm and 1300 nm using the 850/1300 source and meter
Measures optical power and loss at 1310 nm and 1550 nm using the 1310/1550 source; calibrated wavelengths in the power meter at 1490 nm and 1625 nm also allow for readings from other sources
Offers quick remote identification of cabling runs with FindFiber Remote IDs
Conduct pre-testing and qualify cabling runs
Auto-senses source wavelength
Saves 1000 test results
Single port testing for simple network connection
Ruggedly built for demanding field use
LinkWare Cable Test Management Software documents, reports, and manages all test data
|
Optical power meter
|
|
|
|
FISHER GOLD BUG-2 METAL DETECTOR / 1 YR FACTORY WARRANTY-FIS001
|
Extreme Sensitivity to Small Gold Nuggets
High Precision Dual-Control Ground Balance
Iron Disc Mode for Iron & Hot Rock Rejection
Deep Target Audio Boost
Lightweight & Hip-Mountable
Available with Either a 6 ½” or 10” Elliptical Search Coil
Operating Frequency: 71 kHz
Our detector is ORIGINAL from USA. Many other online sellers are selling pirated one. Beware!
|
Metal Scanners/Locators
|
|
|
|
Fluke 789 Process Meter
|
24 V Loop power supply
HART mode setting with loop power (adds 250 ohm resistor)
100 % larger dual display
1,200 ohm drive capability on mA source
Enhanced backlight with two brightness settings
0-100 % mA Span Check buttons to toggle between 4 and 20 mA
Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003)
Externally accessible fuses for easy replacement
DMM designed to meet 1000 volt IEC 1010 CAT III standards
Precision 1000 V, 440 mA true-rms digital multimeter
Frequency measurement to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode Test and Continuity Beeper
Simultaneous mA and % of scale readout
20 mA dc current source / loop calibrator / simulator
Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
Externally accessible battery for easy battery changes
Fluke combined a loop calibrator and a DMM to give process technicians double the power in one tool (the Fluke 787). Now we made it even better – the ultimate loop calibration multimeter – the Fluke 789 ProcessMeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. With its... |
Calibrators/Injectors
|
|
|
|
FIL110A-Portable fuel and oil cleanliness analyser
|
Portable diesel fuel and oil contamination monitor.Fitted with laser particle counter. Results inISO4406, NAS and SAE formats.High viscosity pumpallowing oils up to 424cst. |
Oil Analyser
|
|
|
|
FIL110B- PORTABLE FUEL AND OIL CLEANLINESS ANALYSER WITH WATER MONITOR
|
Portable diesel fuel and oil contamination monitor.Fitted with laser particle counter. Results inISO4406, NAS and SAE formats.High viscosity pumpallowing oils up to 424cst. Water Monitor and displayfor % Saturation |
Oil Analyser
|
|
|
|
FIL110C-PORTABLE DIESEL FUEL/OIL CONTAMINATION MONITOR W WATER MONITOR 4-20MA
|
Portable diesel fuel and oil contamination monitor.Fitted with laser particle counter. Results inISO4406, NAS and SAE formats.High viscosity pumpallowing oils up to 424cst. Filtertechnik water in dieseland oils sensor. 4-20mA output scaled over 0-500ppm. |
Oil Analyser
|
|
|
|
FIL110D-PORTABLE PPM MEASUREMENT UNIT FOR USE ON DIESEL FUELS
|
Portable PPM measurement unit for use on diesel fuelsand oils. Gives water content levels of real time PPM.Built in rechargeable battery and pump. |
Oil Analyser
|
|
|
|
FIL310- REMOTE OPTICAL OIL PARTICAL COUNTER WITH TOP ASSY
|
• Live readouts of: NAS 1638, SAE A5 4059 & ISO 4406 - live on screen • 4 Particle sizes: 4µ, 6µ, 14µ & 21µm • Windows 7 compliant • Highly accurate+/- 0.5 ISO code • Alarm indication and relay outputs • Real time analysis of fluid cleanliness • Fluid compatibility: Hydraulic & Lubrication oils, mineral & synthetic, diesel fuel, biodiesel & petrol |
Oil Analyser
|
|