|
|
LUT0009-Voltage/Current Loop Calibrator
|
VOLTAGE/CURRENT CALIBRATOR * Current source : 0 to 24 mA, 2 ranges. * Current measurement : 0 to 24 mA, 2 ranges. * Power (12 V) and current measurement of two wire loop : 0 to 24 mA, 2 ranges. * DC mV source : -199.9mV to +199.9mV. |
Calibrators/Injectors
|
|
|
|
PRO0045-ICAL DOCUMENTING MULTIFUNCTION CALIBRATOR/ARBITRARY FUNCTION GENERATOR
|
iCal is a multifunction calibrator and an arbitrary function generator
Unique mapping function allows direct calibration of voltage and temperature
Source: mA(4 to 20mA), V(0 to 15V, 0 to 70mV), Hz, sine wave, square wave, triangular wave, truncated sine wave, and user programmable waveforms
Measurements: Current (mA), voltage (V, mV), temperature (°C, and °F)
Frequency range: (0.3 Hz to 20 kHz)
Programmable frequency and phase synthesis of single tone and DTMF for devices such as MP3, MD, and telephone lines
The Function Generator can examine transistor DC bias characteristics, and amplifier overload and transient characteristics
The iCal can be programmed with a PC or Laptop via the USB port
All calibration results can be saved in iCal's memory (2000 records)
Data can be saved under different file names for efficient record keeping
|
Calibrators/Injectors
|
|
|
|
PRO0005-Process Calibrator Voltage/Current/Temperature Calibrator/Injector
|
4-20mA, 0-20mA, 0-24mA with 1 m A resolution
0-100mV with 10 m V resolution
0-12V with 1mV resolution
Thermocouple K,J,E,T TYPE 1 o C 1 o F resolution
Frequency 2 - 50,000Hz
|
Calibrators/Injectors
|
|
|
|
Fluke 789 Process Meter
|
24 V Loop power supply
HART mode setting with loop power (adds 250 ohm resistor)
100 % larger dual display
1,200 ohm drive capability on mA source
Enhanced backlight with two brightness settings
0-100 % mA Span Check buttons to toggle between 4 and 20 mA
Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003)
Externally accessible fuses for easy replacement
DMM designed to meet 1000 volt IEC 1010 CAT III standards
Precision 1000 V, 440 mA true-rms digital multimeter
Frequency measurement to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode Test and Continuity Beeper
Simultaneous mA and % of scale readout
20 mA dc current source / loop calibrator / simulator
Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
Externally accessible battery for easy battery changes
Fluke combined a loop calibrator and a DMM to give process technicians double the power in one tool (the Fluke 787). Now we made it even better – the ultimate loop calibration multimeter – the Fluke 789 ProcessMeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. With its... |
Calibrators/Injectors
|
|
|
|
FIL310- REMOTE OPTICAL OIL PARTICAL COUNTER WITH TOP ASSY
|
• Live readouts of: NAS 1638, SAE A5 4059 & ISO 4406 - live on screen • 4 Particle sizes: 4µ, 6µ, 14µ & 21µm • Windows 7 compliant • Highly accurate+/- 0.5 ISO code • Alarm indication and relay outputs • Real time analysis of fluid cleanliness • Fluid compatibility: Hydraulic & Lubrication oils, mineral & synthetic, diesel fuel, biodiesel & petrol |
Oil Analyser
|
|
|
|
FIL110D-PORTABLE PPM MEASUREMENT UNIT FOR USE ON DIESEL FUELS
|
Portable PPM measurement unit for use on diesel fuelsand oils. Gives water content levels of real time PPM.Built in rechargeable battery and pump. |
Oil Analyser
|
|
|
|
FIL110C-PORTABLE DIESEL FUEL/OIL CONTAMINATION MONITOR W WATER MONITOR 4-20MA
|
Portable diesel fuel and oil contamination monitor.Fitted with laser particle counter. Results inISO4406, NAS and SAE formats.High viscosity pumpallowing oils up to 424cst. Filtertechnik water in dieseland oils sensor. 4-20mA output scaled over 0-500ppm. |
Oil Analyser
|
|
|
|
FIL110B- PORTABLE FUEL AND OIL CLEANLINESS ANALYSER WITH WATER MONITOR
|
Portable diesel fuel and oil contamination monitor.Fitted with laser particle counter. Results inISO4406, NAS and SAE formats.High viscosity pumpallowing oils up to 424cst. Water Monitor and displayfor % Saturation |
Oil Analyser
|
|