|
|
YOKOGAWA CLAMP-ON POWER ANALYZER CW240
|
The CW240 power meter is a complete tool for enhancing energy efficiency, finding areas for improvement and assessing equipment lifecycles. The meter provides in-depth information on how an item of equipment, an area of a plant or a complete facility is operating that goes beyond simply measuring power usage.
By using the supplied clamp-on components and probes, users can better determine maintenance, repair and replacement schedules for equipment such as transformers and motors. Information is provided with respect to load factors and demand factors, as well as current/voltage fluctuations at motor start-up. |
PORTABLE POWER MONITOR/RECORDER
|
|
|
|
YOKOGAWA MODEL CW10 CLAMP-ON POWER METER
|
The CW10 is more like a tester type rather than a recorder, which can measure single phase AC and DC Power, Voltage, Currents, Power Factor, Frequency, Harmonics. It will also contribute to workers maintenance of not only consuming equipment but equipment for renewable energy such as solar and wind power generation. |
PORTABLE POWER MONITOR/RECORDER
|
|
|
|
YOKOGAWA CLAMP-ON TESTER FOR AC/DC CURRENT #CL220
|
AC/DC current measurements with current ranges up to 300A
24mm in diameter of measurable conductor
Light weight & compact design
Mean value display
Sleep function
Approved for comformity to safety standards EN61010-1, EN61010-2-032 (CAT. III 300 V)
|
CLAMP-ON TESTERS
|
|
|
|
YOKOGAWA CLAMP-ON PROCESS METER FOR DC MA CURRENT #CL420
|
This device allows the user to make safe current checks of 4 to 20mA without breaking the loop. In addition, the output function provides a simple way to log and monitor the data.
0.2% Accuracy, 0.01mA Resolution
Dual Display
LED Torch Light, Backlight Display
Analog Output Available
|
CLAMP-ON TESTERS
|
|
|
|
YOKOGAWA CLAMP-ON TESTER FOR LEAKAGE CURRENT #30031A/30032A
|
Leakage current measurement range from 3mA to 60A
Diameter of measurable conductor: 40 mm max.
Easier and clear display
|
CLAMP-ON TESTERS
|
|
|
|
YOKOGAWA PORTABLE DATA LOGGER - DATUM Y XL120
|
A world first in data loggers! We are the first to obtain IPv6 Ready Logo Phase-1(ID:01-000273).Portable size (155×155×55mm) and lightweight (approx. 800g) lets you carry with one hand.Use of a color TFT LCD with wide viewing angle. |
PORTABLE DATA LOGGER
|
|
|
|
YOKOGAWA PRECISION DOUBLE BRIDGE 2769
|
Model 2769 is a compact, portable Kelvin double bridge designed for measuring low resistance from 0.1 ohm to 110 ohm with four multiplication plugs and one measuring dial. It has built-in standard resistors, bridge power source and high-sensitivity taut-band suspension system electronic DC galvanometer. |
DC PRECISION MEASURING
|
|
|
|
YOKOGAWA PRECISION WHEATSTONE BRIDGE 2755
|
Model 2755 measures resistances from 1 Ω to 10 MΩ by operation of dials and switches. Batteries and a galvanometer are self-contained. The front control panel is provided with power and galvanometer circuit selectors, one ratio arm, and four measuring dials.
Model 2755 is also equipped with a Murray and Varley Loop Tester for convenient location of line faults such as "shorts" and "grounds" in power, telephone, telegraph, and signal cables.
No auxiliary attachment required
Galvanometer with a built-in protection circuit
Compact, lightweight (2 kg)
Built-in Murray & Varley loop tester
|
DC PRECISION MEASURING
|
|