|
|
LUT0298-COMPLETE ADVANCED SD CARD GRAPHICAL/ WAVEFORM DATALOGGING 3-PHASE POWER & HARMONICS ANALYSER W 3 X 1200A CLAMP
|
Features:
•Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,3P/3W, 3P/4W •3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary •Current probe input signal/ranges with selection:Input signal (ACV):200 mV/300 mV/500 mV/1 V/2 V/3 VRanges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A. •Meter can cooperate the universal current probes •Measurement: V (phase-to-phase), V (phase-to-ground) A (phase-to-ground) KW / KVA / KVAR / PF (phase) KW / KVA / KVAR / PF (system) KWH / KVAH / KVARH / PFH (system) Phase angle •Harmonics display (1-50th order) •Simultaneous display of Harmonics and Wave form •Display of Waveform with Peak Values •Analysis of Total Harmonic Distortion ( THD ) •Graphic Phase diagram with 3-Phase system parameters •3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR ) and Unbalanced Factor •Calculated Unbalanced Current through Neutral Line ( An )
Standard Accessories:
* Instruction manual............... 1 PC * Test Leads (TL88-4AT).......... 1 Set (4 PCs) * Alligator clips (TL88-4AC) 1 Set (4 PCs) * Clamp Probe ( CP-1201 )....... 3 PCs * AC to DC 9V adapter..............1... |
Power analysers/Power meters
|
|
|
|
LUT0339-COMPLETE SD CARD KWH DATALOGGING 3-PHASE POWER ANALYSER/LOGGER W 3 X 1200A CLAMP - 2 YEARS WARRANTY
|
Features:
•Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W •Voltage & Current are the True RMS value. •True Power ( KW、MW、GW ) measurement. •Apparent Power ( KVA、MVA、GVA ) measurement. •Reactive Power ( KVAR MVAR、GVAR) measurement. •Watt-Hour ( WH、SH、QH、PFH ). •Power Factor( PF )、Phase Angle( Φ ). •Voltage measurement range : 10 to 600 ACV •Current measurement range: 0.2A to 1200 ACA. •Programmable CT ratio (1 to 600) and PT ratio (1 to 1000). •ACV input impedance is 10 Mega ohms. •Safety Standard : IEC 1010, CAT III 600V •Built-in clock and Calendar, real time data record with SD memory card , sampling time set from 2 to 7200 seconds. Just slot in the SD card into the computer, it can down load the all the measured value with the time information ( year/month/data/hour/mimute/second ) to the Excel directly, then user can make the further data analysis by themselves. •Measurement: * ACV * ACA * AC WATT ( True Power )AC WATT( Apparent Power )AC WATT( Reactive Power ) * Power factor * Phase angle * Frequency
Standard Accessories:
* Instruction manual.......................1 PC * Test Leads... |
Power analysers/Power meters
|
|
|
|
LUT0163B-Benchtop Power Meter(Watt, VA, Power factor, ACV, ACA, DCV, DCA, VAr, Whr, ohms,)
|
0.1 W resolution ( <1000 W ), high precision and high resolution in the low watt range, good performance , for low power LED lamp watt measurement
Supper large LCD, easy to read-out, display the Watt, Power factor, Voltage & Current value at the same time.
Accept different kinds current input signal as direct input, inductive clamp probe or CT ( current transformer ).
Auto range.
Built-in peak hold & data hold function.
RS-232 output interface.
Power supply by batteries or AC to DC adapter.
- See more at: http://www.test-measurement-australia.com.au/electrical/lutron-dw-6090a#sthash.oTAjYKvQ.dpuf
Multi-functions: Watt, VA, W hr, Power factor, ACV, ACA, DCV, DCA, Hz, ohm
True AC power measurement, not apparent power
True RMS for ACV and ACA
Display Watt, power factor, V and A simultaneously
Auto range, Peak-hold and Data-hold
RS-232 serial output interface
Watts (AC true power)
Direct input: 1W-100kW Current probe: 1W-2,000kW
VA(AC)
Direct input: 0.01VA-40kVA
Power Factor:
0.01-1.00
ACV/DCV
0.1V-600V
ACA/DCA
Direct input: 0.01A-20A Current probe: 1A-1000A
Watt Hour
Direct input:... |
Power analysers/Power meters
|
|
|
|
LUT0366-Clamp power analyser 2000amps 600VAC SD logging (Same as Fluke 345)
|
The clamp power analyser is a very economical solution for the analysis of single phase or balanced 3 phase systems with voltages to 600VAC and current to 2000 amps. The product uses the same SD card logging. Readings are logged from every 2 second to 7200 seconds as instantaneous values. It also captures 3 types of transient events with programmable threshold. The display is graphical dot matrix and has many graphic formats including waveform on voltage and current - phasor diagram and others.
Measures ACV, ACA, KW, KVA, KVAR, PF
Measures KWH, KVAH, KVARH, PFH
Frequency, harmonics to 50th
Type K thermocouple input 0.1 resolution to 199.9C then 1C to 1200C
SD card logging
Cables to 57mm 10amps to 2000amps autorange
Record graphic displays to memory as .bmp files
|
Power clamps
|
|