You have 0 items in your cart.
| Name | Description | Category | ||
|---|---|---|---|---|
|
Fluke BC190 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - BC190/801 (Europe) 230V ± 10% - BC190/803 (North America) 120V ± 10% - BC190/804 (United Kingdom) 230V ± 10% - BC190/806 (Japan) 100V ± 10% - BC190/807 (Australia) 230V ± 10% - BC190/808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 are equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. (Line cord not included) | Batteries, Charges and Adapters |
|
|
Fluke BC190 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - BC190/801 (Europe) 230V ± 10% - BC190/803 (North America) 120V ± 10% - BC190/804 (United Kingdom) 230V ± 10% - BC190/806 (Japan) 100V ± 10% - BC190/807 (Australia) 230V ± 10% - BC190/808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 are equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. (Line cord not included) | Batteries, Charges and Adapters |
|
|
Fluke BE9005 Battery Eliminator | 7.5V dc battery eliminator for operation of calibrator from 120 volt AC line UL/CSA recognized For use in North America; 120V ac 60 Hz lines 3.8" x 2.5" x 2.2" (96 mm x 63 mm x 56 mm); 72" (1.8m) cord Weight: 1 lb/0.5 kg One year warranty | Batteries, Charges and Adapters |
|
|
Fluke PM8907 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. Line cord not included A North American line plug adapter is included | Batteries, Charges and Adapters |
|
|
Fluke PM8907 Line Voltage Adapter/Battery Charger | Mains (Line Voltage) - 801 (Europe) 230V ± 10% - 803 (North America) 120V ± 10% - 804 (United Kingdom) 230V ± 10% - 806 (Japan) 100V ± 10% - 807 (Australia) 240V ± 10% - 808 (Universal) switchable 115V± 15% or 230V ± 15% - 808 is equipped with a male receptacle plug that must be connected to a line cord appropriate for local use. Line cord not included A North American line plug adapter is included | Batteries, Charges and Adapters |
|
|
Fluke TI-CAR Charger | For the ultimate flexibility in the field - recharge your thermal imager wherever and whenever you need to For use with: Ti32, Ti25, Ti10, TiR32, TiR1, TiR | Batteries, Charges and Adapters |
|
|
Fluke PM9080 Optically Isolated RS-232 Adapter | Safety designed serial interface for digital hard-copy output to serial printer or remote control and data exchange with a PC. Compatible with all Fluke ScopeMeter® test tools, with Power Quality Analyzers, Graphical MultiMeters and MultiFunction Counters. Hard Copy: ScopeMeter test tools support Epson FX/LQ Series, LaserJet and DeskJet compatible printers Remote control: Waveforms, Scope and Meter measurements, Front Set-ups and performance verification/calibration Transfer rate: up to 57k6 Baud | Batteries, Charges and Adapters |
|
|
Fluke SV225 Stray Voltage Adapter | Stray voltage can appear in electrical installations, due to the capacity between wires This may result in erroneous readings on high impedance meters The SV225 solves this without compromising safety On energized wires, the meter will indicate the real voltage On non-energized circuits the meter will read close to zero (even if there are stray voltages) It can be used with all modern meters with standard input spacing. Rated CAT III 1000V, CAT IV 600 V | Batteries, Charges and Adapters |
|